Download

NuGen Audio NuGen Complete Master Edition VST 03
2010 | 19.2 MB


Visualizer v1.9.2

If you find your production work can be slow and difficult, imprecise or
arbitrary. Problems are difficult to track down and mixing can become a
strange balance of guesswork and intuition, then you need some better
tools.

SEQ 1 and SEQ 2 Master Edition v1.2.6

The NuGen Audio SEQ series, unlike many digital EQ's, is linear phase.
This means that the phase shift is linear across the frequency spectrum,
resulting in a natural sounding EQ change, and producing minimal phase
artifacts.

Traditional EQ algorithms employ a mathematical technique known as IIR
(Infinite Impulse Response). Whilst this provides low CPU usage and is
relatively simple from a mathematical point of view, there is an
important side effect known as Phase Warping. Digital EQ utilising the
classic the IIR approach distorts the relationship between frequency and
phase.

The computational algorithm employed in SEQ1 is based up on FFT (Fast
Fourier Transform Analysis). This is a much more involved process,
involving transformation of the audio data into the frequency domain,
before applying frequency related computations and then transforming
back into the temporal domain. The advantage of this process is that the
frequency and temporal relationship remains intact -- linear phase
transformation. The benefit of this method is that linear phase
adjustments sound clearer, it is possible to create a much more
transparent EQ using this technology. Phase Warping also affects the
clarity of transients, as it causes Phase Smearing. Linear Phase
calculations avoid this limitation, producing a sharper audio image.

Monofilter v3.2.10

Used and trusted by producers the world over, MONOFILTER grabs hold of
your bass and secures it solidly within your mix. Intuitive controls
allow you to quickly anchor the power, whilst retaining the essential
character and perceived spatial characteristics.

MONOFILTER brings back the centre of your bass, so easily lost through
stereo effects processing, synth sound generation, unwanted phase
inconsistencies and live recording mic. bleed. Our market leading
features now give you clear control over stereo spread, transition and
phase alignment, and the unique WYSIWYG interface gives you clear and
exacting visual feedback.

Stereoizer v3.0.5

Stereoizer is a high-specification stereo image manipulation tool
suitable for natural expansion, reduction and introduction of stereo
width at any stage of the audio production process. Developed for and
tested by professional audio engineers, Stereoizer adds natural sounding
width and depth to any audio recording, mono or stereo, leaving the
inherent character of the original source intact. Quite simply
Stereoizer will make your audio more coherent, highly polished and
spatially balanced without adding artificial reverberation, chorusing or
delay.

Stereoplacer v2.4.3

Adjust the position of percussion sounds in a stereo loop, or add stereo
positioning to mono samples, placing frequencies exactly where you want
them. Stereoplacer gives you control that is simply not available
within a traditional mix setup. Stereoplacer is a fine-tune parametric
EQ with the addition of stereo positioning controls. This allows you to
tune each band into specific frequencies and move the frequency content
around in the stereo sound stage. You can also apply different amounts
of cut and boost to the Left and Right channels, or allow Stereoplacer
to keep the balance of the original sounds while you choose the
position.

Also, we included:

Line-up v2.2.4

Line-up is a delay unit, specifically designed to allow rapid and simple
sample-accurate delays to be set-up with minimum CPU overhead and
screen imprint.

Delay time automatically steps through powers of two to allow rapid
dial-in of frequently required numbers. Double-click allows direct
numerical entry and holding down shift whilst click-dragging steps
through in single samples.

Although primarily intended as a line up tool for misaligned tracks (no
host PDC, phase re-alignment, long mic/speaker recording delay, etc.),
Line-up can also be used as a send effect to create very precise chorus,
phase and doubling effects.

And three documents which are available registred users.

NuGen.Audio.NuGen.Complete.Master.Edition.VST.03.2 010-ASSiGN